ErgoDox Wireless Peripheral Firmware
Flashing Instructions
Please check the INFO_UF2.TXT
file in the SliceMK
bootloader virtual drive
to determine your PCB version. Be sure to check the file on both keyboard
halves as they may be different. Loading the firmware
for the incorrect version may cause irreversible damage to your keyboard
PCB.
Once you determine your PCB version, you can find the corresponding peripheral UF2 firmware file linked below in the "Downloads" sections.
- If you are using a dongle, you will need both
peripheral-left.uf2
andperipheral-right.uf2
. The dongle firmware will come from the keymap configurator. - If you are not using a dongle, you will only need
peripheral-right.uf2
. The left half firmware will come from the keymap configurator.
If you are not sure how to use the firmware files on this page, please check out the Peripheral Flashing under the Getting Started Guide.
SliceMK peripheral firmware version 3.3.0 was released on 2023-07-16.